List of Contributions

Mr. John Ievers

MapInfo Pro 17 Beta

Contact Details

My Content

1 to 20 of 50+ total

RE: MapInfo Monday: MapInfo Pro v23.2

Posted By John Ievers 04-27-2026 11:26
Found In Egroup: MapInfo Pro \ view thread
Hi Kate This will depend upon what version of Access database you are using. If you have an older Access/Office version, you may need to install the Microsoft Access Database Engine 2016. With Office 365 you cannot Open Table as a mdb/accdb directly but you can Open your Access table with ODBC. The ...

RE: MapInfo Monday: MapInfo Pro v23.2

Posted By John Ievers 04-21-2026 12:05
Found In Egroup: MapInfo Pro \ view thread
I have been through Precisely Support about this and received the following response: The MapInfo Product Development team has engaged directly with Microsoft and confirmed that there is currently no comprehensive replacement available for the legacy Microsoft Access Database Engine driver, which is ...

RE: MapInfo Monday: Save Table As Older Version

Posted By John Ievers 04-20-2026 09:34
Found In Egroup: MapInfo Pro \ view thread
It took us a while to realise that the >Support MZ was ticked on by default and was stopping us saving a table as an older version Always check this is not ticked ------------------------------ John Ievers CDR Group Limited Hope Valley, United Kingdom ------------------------------

RE: MapInfo Monday: MapInfo Pro v23.2

Posted By John Ievers 04-17-2026 09:42
Found In Egroup: MapInfo Pro \ view thread
I am puzzled why the option for the MS Access driver is for an old and unsupported version (2016). Surely we need MapInfo to run on supported versions? ------------------------------ John Ievers CDR Group Limited Hope Valley, United Kingdom ------------------------------

RE: MapInfo Monday: Population Drive Distances

Posted By John Ievers 03-16-2026 11:25
Found In Egroup: MapInfo Pro \ view thread
I certainly favour the Drivetime isochrones for humans in vehicles (not everything is). Depending upon the number of sites and zones created, this could take you close to the 2,000 free credits per month limit!! ------------------------------ John Ievers CDR Group Limited Hope Valley, United Kingdom ...

RE: MapInfo Monday: Save Copy of Table As

Posted By John Ievers 03-09-2026 08:08
Found In Egroup: MapInfo Pro \ view thread
When saving a table back to the classic 32-bit *.tab format, make sure the >Support MZ button is unchecked. If it is checked, then the result will be a 64-bit Extended *.tab format - which you probably don't want. You will receive a message that you need MapInfo v15.2, when you try to open it in v15.0 ...

RE: Crash when packing tables

Posted By John Ievers 02-23-2026 12:23
Found In Egroup: MapInfo Pro \ view thread
Hi Dale My guess would be anti-virus rules. Viruses tend to create new files - so it can be a basic rule to block unknown files being generated. The same goes for editing, where you may need to allow files with the extension .tin .tda and .tma Regards ------------------------------ John Ievers ...

RE: MapInfo Monday: Offset Object Multiple Times

Posted By John Ievers 02-09-2026 07:24
Found In Egroup: MapInfo Pro \ view thread
Hi Peter My Marketplace also now shows the latest version. A gremlin perhaps.... 😉 ------------------------------ John Ievers CDR Group Limited Hope Valley, United Kingdom ------------------------------ ...

RE: MapInfo Monday: Offset Object Multiple Times

Posted By John Ievers 02-02-2026 07:20
Found In Egroup: MapInfo Pro \ view thread
Hi Peter What is the current version of DrawTools? The MarketPlace indicates 2.0.3.0 and last published Dec 12,2018 - which I suspect is incorrect. ------------------------------ John Ievers CDR Group Limited Hope Valley, United Kingdom ------------------------------

RE: Explorer window

Posted By John Ievers 02-02-2026 05:59
Found In Egroup: MapInfo Pro \ view thread
Hi Giselle I'm not sure what you mean here. My Explorer window is "Docked" on the left - you could dock it on the right if you want. And what are the double arrows that you mention? ------------------------------ John Ievers CDR Group Limited Hope Valley, United Kingdom ----------------------- ...

RE: Interesting Article: Differences Between Geocoding & Geo Addressing

Posted By John Ievers 11-05-2025 06:21
Found In Egroup: Spectrum Technology Platform \ view thread
Hi Matt I like the article and remember reading it at the time. We tend to use Geocoding for any geographic object - not just addresses. Addresses usually relate to postal addresses and the location is in respect to delivering post and packages. Not all buildings have a postal address (e.g. churches) ...

RE: Save query results as .qry

Posted By John Ievers 10-24-2025 10:58
Found In Egroup: MapInfo Pro \ view thread
I have posted a suggestion to give the >Save Query it's own control. There is plenty of room since they separated out the >Save Table As control. Same issue really. Vote here Make >Save Query As button an individual button | Precisely Ideas ------------------------------ John Ievers CDR Group Limited ...

RE: Using Grid Data

Posted By John Ievers 09-22-2025 10:01
Found In Egroup: MapInfo Pro \ view thread
Hi Ryan You will need the Advanced Raster Module (standard if you have a Subscription licence). Plenty of information and introduction in the Help files https://help.precisely.com/r/t/1031447250/2023-12-31/MapInfo-Pro-Advanced/pub/2023/en-US/MapInfo-Pro-Advanced-Help/Introducing-MapInfo-Pro-Advanced2023 ...

Getting a good database structure is important

Posted By John Ievers 08-20-2025 05:47
Found In Egroup: MapInfo Pro \ view thread
Recently, I came across a fine example of why you should not be lazy in designing your database structure. A popular dataset in the UK, containing 1.7 million point records is now available in GeoPackage format. I downloaded and saved it as a MapInfo table but a little shocked that the data file came ...

RE: MapInfo Monday: Cartesian versus Spherical Calculation Method

Posted By John Ievers 04-23-2025 06:23
Found In Egroup: MapInfo Pro \ view thread
Thanks Peter Operating in the UK, I nearly always use British National Grid (BNG) with Ordnance Survey mapping - so that is always Cartesian and set my Options/Defaults to BNG and 1mm Accuracy Projection. Yesterday, I thought I was using data in BNG until I tried to update a column with the CartesianArea. ...

RE: MapInfo Monday: View Entire

Posted By John Ievers 02-10-2025 03:36
Found In Egroup: MapInfo Pro \ view thread
Thanks Peter I also like to use the View Entire Layer list control for viewing the extent of your Queries or Selections, which will appear in your list once they are present. Cheers ------------------------------ John Ievers CDR Group Limited Hope Valley, United Kingdom ----------------------- ...

RE: Moving Map Window embedded scalebar closer to Map Window frame

Posted By John Ievers 11-13-2024 08:04
Found In Egroup: MapInfo Pro \ view thread
Hi Jason I would certainly use the scalebar available with the Layout - it is far more flexible than the older scalebar embedded in the Map Window. Especially if your Insets are only 5cm wide! ------------------------------ John Ievers CDR Group Limited Hope Valley, United Kingdom ------------ ...

RE: A .pprc file is created when MapInfo v16 opens a cloud optimised geotiff

Posted By John Ievers 11-07-2024 11:02
Found In Egroup: MapInfo Pro \ view thread
Hi Hugo Are you still using MapInfo v16? Lots of change since then.... ------------------------------ John Ievers CDR Group Limited Hope Valley, United Kingdom ------------------------------

RE: Any issues when upgrading to MapInfo Pro v2023 from older versions

Posted By John Ievers 10-31-2024 08:36
Found In Egroup: MapInfo Pro \ view thread
Hi Finlay MapInfo always strongly supports backward compatibility with old table formats. Not sure what you mean about "customised styles" - you have more options now. The article that you refer to highlights the issue of mixing 32-bit and 64-bit applications with Microsoft and MS Office. Best option ...

RE: MapInfo Monday: What3words feature to update a table with the W3W Address

Posted By John Ievers 10-30-2024 09:46
Found In Egroup: MapInfo Pro \ view thread
Hi Tom I have offered my feedback to w3w along these lines too. It has already gained significant public adoption and the mobile phone app is still free to use. Delivery companies have started to adopt the system and all the emergency services in the UK are using it. ------------------------------ ...