List of Contributions

Andreas Homa

Employee
Geocoding EAP

Contact Details

My Content

1 to 18 of 18 total
Posted By Andreas Homa 03-04-2024 06:16
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
Hi Kate, in addition to my statement above you can configure that pixel width in the project settings for each layer. See Search Width setting in below picture: ------------------------------ Andreas Homa Principal Solution Consultant Precisely | Trust in Data ------------------------------
Posted By Andreas Homa 03-04-2024 05:32
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
Hi Kate, I assume you click on the map and you get also close boundaries through the location search. That happens because when you click into the map SSA creates a circle of 4 pixels around the click and searches within that circle. This is done as you would not find any point location by clicking ...
Posted By Andreas Homa 10-24-2023 05:43
Found In Egroup: Spectrum Technology Platform
\ view thread
Hi Karli, the Spectrum Spatial team is looking to support Postgres 16 and PostGIS 3.4 in version 24.1 coming next year. Regards Andreas ------------------------------ Andreas Homa Principal Solution Consultant Precisely | Trust in Data ------------------------------
Posted By Andreas Homa 09-05-2022 13:40
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
Hi Chris, I was able to reproduce the issue. Getting the same error with url: flood-warning-areas Calling the GetCapabilities directly in a browser works (GetCapabilties Url) Could you please raise this as an issue with support: support@precisely.com In your email state, that no error or exception ...
Posted By Andreas Homa 08-16-2022 05:03
Found In Egroup: Geocoding
\ view thread
Hi Libo, did you sort it out? If not the APIKEY is not the token needed. If you have created your APIKEY and your SECRET follow these instructions to create an access token: Generating an OAuth Token Regards Andreas ------------------------------ Andreas Homa Principal Solution Consultant ...
Posted By Andreas Homa 03-02-2022 03:30
Found In Egroup: Spectrum Technology Platform
\ view thread
Hi George, Spectrum Spatial only can connect to SQL Server through the TCP/IP protocol. Unfortunately MS SQL Server installs with the TCP/IP protocol disabled. To enable the TCP/IP protocol run the "SQL Server Configuration Manager" Expand "SQL Server Network Configuration" Click "Protocols ...
Posted By Andreas Homa 09-28-2021 03:37
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
Hi Chris, it is worth mentioning that the folder named in the above documentation must be "SpatialSymbols". You can't rename that folder. Andreas ------------------------------ Andreas Homa Precisely Software Inc. Troy NY ------------------------------
Posted By Andreas Homa 03-13-2020 03:52
Found In Egroup: Geocoding
\ view thread
Hi Jeff, is there a list of the different penalty values somewhere? Thanks Andreas ------------------------------ Andreas Homa Pitney Bowes Software Inc. Troy NY ------------------------------
Posted By Andreas Homa 05-15-2019 05:21
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
If you use the Feature Service in your angular development, like http://spectrum:8080/rest/Spatial/FeatureService/tables/features.json?q=SELECT * FROM "/Samples/NamedTables/WorldTable" WHERE Country='CANADA' than the proposed way of increasing the maximum number of features will help you. Again there ...
Posted By Andreas Homa 05-14-2019 10:26
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
Hi Augustin, you can configure this parameter within the Spatial Manager in Spectrum. Go to http://spectrum_host:8080/SpatialServerManager Login as an admin. In the banner go to Services=>Feature Here you will be able to increase the maximum of features returned. If you mean with 'maximum of ...
Posted By Andreas Homa 04-01-2019 14:13
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
Hi Ott, is this a vector layer coming from Spectrum? If yes, make sure you have set the caching time for the layer to 0 (zero). This will make sure, the browser does not cache the tiles and next time you pan the map, the map images of the layer gets refreshed. I have written an extension for refreshing ...
Posted By Andreas Homa 12-05-2018 03:09
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
HI Jason, you can use the parameters lon, lat and zoom in the url to let SSA start at a certain WGS84 coordinate. You can also use x,y for the coordinate system of the map - usually EPSG:3857. SSA supports more URL parameters. Have a look here: Administration guide Regards Andreas ----- ...
Posted By Andreas Homa 11-19-2018 05:50
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
It might happen to you that one morning you wake up and you figure out that your license for Spectrum Spatial has expired. To avoid this sceanrio you can setup email notifications on Spectrum license expiration. Follow this documentation to set this up: Email Notification ------------------------------ ...
Posted By Andreas Homa 10-25-2018 09:49
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
Hi George, https will use port 443 and will need a certificate installed. Is this what you want? To just change the port in SSA you can open the server.xml in the folder Tomcat7\AnalystConnect\conf and search for the line starting with <connector. This line will have a port attribute. You can change ...
Posted By Andreas Homa 07-02-2018 11:22
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
I agree to Eric. This is an unusual behaviour. In addition to Eric, the only normal behaviour of MI Pro blocked after opening a workspace I can think of is when a thematic map needs to be calculated on lots of data. Is this the case in your workspaces? Can you share the workspaces? Just the .wor file. ...
Posted By Andreas Homa 06-27-2018 04:37
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
Hi Tony, the memory requirements for SSA expect no other tool on the machine that utilises a lot of memory. Spectrum and Spectrum Spatial Analyst are Java processes which are limited in memory usage by default. Each Tomcat Process will use maximum 1GB of memory, the Java processes, assuming no values ...
Posted By Andreas Homa 04-05-2018 08:43
Found In Egroup: Spectrum Spatial (SSA/LIM)
\ view thread
Hi Rebecca, running the IIS parallel to SSA and Spectrum is fine as long as the IIS is using a different port. Usually the IIS installs on port 80 which work if you have installed SSA and Spectrum on default ports. You would then create a virtual directory pointing to the folder with you images. ...