List of Contributions

Jane Mason

Contact Details

My Content

1 to 20 of 50+ total

RE: Grid reference mapping: MBX tool for creating points and squares of different sizes from a table of Ordnance Survey British National Grid grid references

Posted By Jane Mason 06-21-2022 06:34
Found In Egroup: MapInfo Pro \ view thread
Thanks for your help, James.  Unfortunately I already tried removing the existing file and the same message occurs so the source code is necessary. Best wishes, Jane ------------------------------ Jane Mason Biological Records Officer (GIS), Suffolk Biodiversity Information Service, UK ----------- ...

RE: Grid reference mapping: MBX tool for creating points and squares of different sizes from a table of Ordnance Survey British National Grid grid references

Posted By Jane Mason 06-10-2022 09:27
Found In Egroup: MapInfo Pro \ view thread
Thanks Bill - I'll try and find out. Best regards, Jane ------------------------------ Jane Mason Biological Records Officer (GIS), Suffolk Biodiversity Information Service, UK ------------------------------

Grid reference mapping: MBX tool for creating points and squares of different sizes from a table of Ordnance Survey British National Grid grid references

Posted By Jane Mason 06-09-2022 11:07
Found In Egroup: MapInfo Pro \ view thread
I had a MapBasic tool called 'GridRefMapper 12.mbx' which worked in 32-bit MapInfo Pro, but not in 64-bit.  When I try, the error given is: (gridrefmapper 12.mb:102) Cannot open file error_log.txt.  It worked fine in Pro v15.  It generated points and grid squares from a table of British National Grid ...

RE: MapInfo Pro v2021.1 crashing on opening workspace

Posted By Jane Mason 05-17-2022 09:52
Found In Egroup: MapInfo Pro \ view thread
Thanks Peter, but it turned out to be the settings under Options > MapInfo Pro Raster > Preferences > Raster Formats - I needed to disable MapInfo raster handlers - on the Native and GDAL tabs (see attached images).  I remember this was recommended for translucent raster display problems a while ago, ...

RE: MapInfo Pro v2021.1 crashing on opening workspace

Posted By Jane Mason 05-17-2022 09:51
Found In Library: Mapinfo Pro

MapInfo Pro v2021.1 crashing on opening workspace

Posted By Jane Mason 05-17-2022 07:41
Found In Egroup: MapInfo Pro \ view thread
Hello everyone, We have a workspace which opens several layers - it's old but it works for us.  It opens fine in v15.0 and v2019.3, but when I try in v2021.1 MapInfo crashes after 6 seconds, without any message or warning.  The layers are all vector, with raster (including seamless tables) and OS ...

RE: Layout scalebar - editable text and shifting position

Posted By Jane Mason 04-21-2022 09:48
Found In Egroup: MapInfo Pro \ view thread
Hi, thank you William - your reply prompted me to go and hunt a bit in MapInfo as your scalebar tool was obviously different from the one I was using.  I had been activating the map window in the Layout, then going Add to Map > Scalebar, which brings up a Create Adornment box where the text can't be ...

Layout scalebar - editable text and shifting position

Posted By Jane Mason 04-20-2022 07:46
Found In Egroup: MapInfo Pro \ view thread
I'm using v2021.1 and have two issues with the Layout Scalebar:   Are there any plans to make the text in the Layout Scalebar editable, so, for example, "kilometers" can be changed to British English spelling and with capital letter (Kilometres)?   Also - I have the same problem as a few others ...

RE: MapInfo Pro 2019.3 Build 41 crashing on zooming in and out

Posted By Jane Mason 03-17-2022 05:20
Found In Egroup: MapInfo Pro \ view thread
Hi Peter, Thanks it seems to be with normal vector tab files, most held locally no web service layers. There are labels set to switch on at certain levels too, but I haven't found if this is the issue. If it's really troublesome I'll contact our IT as it sounds like a local issue. I think we are ...

MapInfo Pro 2019.3 Build 41 crashing on zooming in and out

Posted By Jane Mason 03-16-2022 09:24
Found In Egroup: MapInfo Pro \ view thread
Hello all, I've not long had v2019.3 Build 41 installed on a new laptop and noticed that it's very prone to crashing when zooming in and out - I think it's when layers are set to zoom ranges and so should switch on or off at different zoom levels.  I don't have this problem with v15.0 on the same ...

RE: Unable to created classified raster legend

Posted By Jane Mason 03-15-2022 05:50
Found In Egroup: MapInfo Pro \ view thread
Thanks Peter, yes, that's the thing, getting the legend even though I can load a classified raster - I had thought I'd best do something similar so thanks for the link to the legend image. ------------------------------ Jane Mason Biological Records Officer (GIS), Suffolk Biodiversity Information ...

RE: Unable to created classified raster legend

Posted By Jane Mason 03-04-2022 11:33
Found In Egroup: MapInfo Pro \ view thread
Sounds good Peter - I think you pay for that though, don't you? Thanks, Jane ------------------------------ Jane Mason Biological Records Officer (GIS), Suffolk Biodiversity Information Service, UK ------------------------------

RE: Unable to created classified raster legend

Posted By Jane Mason 03-04-2022 11:31
Found In Egroup: MapInfo Pro \ view thread
Many thanks Sam!  I shall have a look next week.   Have a good weekend, Jane ------------------------------ Jane Mason Biological Records Officer (GIS), Suffolk Biodiversity Information Service, UK ------------------------------

RE: Unable to created classified raster legend

Posted By Jane Mason 03-03-2022 11:15
Found In Egroup: MapInfo Pro \ view thread
Thanks Anshul - I didn't make it clear that I only have MapInfo Pro, not MapInfo Pro Advanced, so I don't have access to the functions of the Calculator tool.  Good to know that I'm not overlooking something though. Thanks for your help, Jane ------------------------------ Jane Mason Biological ...

Unable to created classified raster legend

Posted By Jane Mason 03-02-2022 12:36
Found In Egroup: MapInfo Pro \ view thread
I have a classified raster which I have displayed in v2019.3 using Pseudo Color on the required band and the Advanced Color tool to create colours for each of the 21 classes according to the colour recipe I received with the data. Although in the Color window I can see these classes and their colours ...

RE: Importing Land Cover Map 2020 (25m rasterised land parcels) in MapInfo Pro 2019

Posted By Jane Mason 01-13-2022 06:55
Found In Egroup: UK Users Group \ view thread
Many thanks John, I'll give it a try when they send me the registration info. ------------------------------ Jane Mason Biological Records Officer (GIS), Suffolk Biodiversity Information Service, UK ------------------------------

RE: Importing Land Cover Map 2020 (25m rasterised land parcels) in MapInfo Pro 2019

Posted By Jane Mason 01-12-2022 11:21
Found In Egroup: UK Users Group \ view thread
Hi John, Thanks!  No, they didn't supply a tfw so that's probably the problem.  I'll ask for the tab too.   Happy New Year! Jane ------------------------------ Jane Mason Biological Records Officer (GIS), Suffolk Biodiversity Information Service, UK ------------------------------

Importing Land Cover Map 2020 (25m rasterised land parcels) in MapInfo Pro 2019

Posted By Jane Mason 01-12-2022 08:16
Found In Egroup: UK Users Group \ view thread
Hello all, I have this TIF file Land Cover Map 2020 (25m rasterised land parcels, GB) - EIDC (ceh.ac.uk) covering Suffolk. It is a three-band dataset in GeoTiff format.  Has anyone opened this in MapInfo?  I have Pro 2019 but not Pro Advanced. When I open the TIF the Image Registration box opens asking ...

RE: Show Legend

Posted By Jane Mason 10-26-2021 13:01
Found In Egroup: MapInfo Pro \ view thread
Hi Peter, I've downloaded this tool and find the same as Rex above - if I click on Embed Thematic Legend in the tool, or untick it in the Thematic Legend window in the tool, as soon as I move the map in the map window it comes back.  Is there anything else I can try in 2019.3 Release Build 41?   Thanks, ...

RE: Importing ESRI geodatabase zip file

Posted By Jane Mason 09-02-2021 06:10
Found In Egroup: UK Users Group \ view thread
Many thanks, Andrei.  Defra sent me a new Geodatabase and I was able to unzip it and open it as Universal Data, and I was able to open it in FME too, so all is well.  The must have been an error in the first data sent. ------------------------------ Jane Mason Biological Records Officer (GIS), Suffolk ...