List of Contributions

HÃ¥kan Karlsson

Employee

Contact Details

My Content

1 to 20 of 43 total

RE: Mapinfo 17 - Citrix Zenapp 7.15 & Windows server 2016

Posted By HÃ¥kan Karlsson 02-19-2019 02:54
Found In Egroup: MapInfo Pro \ view thread
We have a partner running MapInfo Pro on a Citrix environment for one of their customers, not sure of the exact Citrix version. It works fine but their setup is done in a way where the software is installed on an available machine each time, and they have identified an issue with 17.0.2 on this setup ...

RE: MapInfo Pro 15.0.3 (32-bit) very slow to start

Posted By HÃ¥kan Karlsson 12-20-2018 05:12
Found In Egroup: MapInfo Pro \ view thread
Note that in order to see the folder of preference file that Andrei references, you will need to set Windows Explorer to display hidden files and folders if you have not already done so. If you don't see the menus in Explorer, press Alt. Then find the Options dialog under one of the menus, go to the ...

RE: Pre-populating (using predefined) attribute data in MapInfo tables

Posted By HÃ¥kan Karlsson 12-07-2018 07:11
Found In Egroup: MapInfo Pro \ view thread
Found it in Idea's Portal, here is the link:  https://ideas.pitneybowes.com/ideas/MIPRO-I-1262 ------------------------------ Hakan Karlsson Presales, Pitney Bowes Sweden ------------------------------

RE: Running V16 and V17 on same Workstation

Posted By HÃ¥kan Karlsson 11-28-2018 12:18
Found In Egroup: MapInfo Pro \ view thread
There are two sides to this, the technical and the commercial.  From a technical point of view, installing version 17 on a machine will normally replace the existing version 16. The user must then select a different folder for version 17, and then the two versions can co-exist without problem. (When ...

RE: Quick-Fire Webinar: Spatial SQL

Posted By HÃ¥kan Karlsson 11-22-2018 03:21
Found In Egroup: MapInfo Pro \ view thread
Sounds like a great session Peter! I remember your post in the old MapInfo journal where you created a buffer and made a spatial join on the fly in SQL (slurry tanks near water stream, was it?). Very nice example, but I would not be able to write it without some repetition. :-)  I do have one ...

RE: What is your favorite keyboard shortcut in MapInfo Pro?

Posted By HÃ¥kan Karlsson 09-11-2018 08:49
Found In Egroup: MapInfo Pro \ view thread
@John Ievers - as Peter mentions above, we introduced the larger set of single key shortcuts with the release of 17.0.1 last week, and these are case sensitive. So S is now actually for Select tool, while s is for snap.

RE: Mind that child! Road safety during the summer holidays

Posted By HÃ¥kan Karlsson 09-03-2018 07:39
Found In Egroup: MapInfo Pro \ view thread
Vital input in increasing the saftey for our kids!   It would be great to learn what effect this kind of analysis can have. Who was/is the map presented to - mainly the traffic planning department, the school staff, the public or someone else?

RE: Fun Swimming Lessons at Canning this summer - submission for mapping contest

Posted By HÃ¥kan Karlsson 08-30-2018 07:46
Found In Egroup: MapInfo Pro \ view thread
Great example of a use case taking advantage of the GeoAPIs for geocoding and generating drivetimes, thanks!

RE: How do you handle spatial forecasts and predictions INSIDE MAPINFO?

Posted By HÃ¥kan Karlsson 06-07-2018 10:07
Found In Egroup: MapInfo Pro \ view thread
Hi Camilo, Great question! Sorry for not replying sooner. It would be good to understand your use case(s). Can you elaborate a bit further on what analytics you are looking for, and the business outcome you are expecting? MapInfo Pro itself mainly supports the spatial calculations and aggregations ...

RE: An overview over Editing and Drawing in MapInfo

Posted By HÃ¥kan Karlsson 05-30-2018 06:56
Found In Egroup: MapInfo Pro \ view thread
This is a great guide Peter! On the subject of precision in your last section, there is another article describing how the built-in tool in MapInfo can be used to easily control the current Bounds, and therby the precision: https://community.pitneybowes.com/communities/community-home/diges ...

RE: Is there any way to attach permanent styling to geopackage format in MapInfo?

Posted By HÃ¥kan Karlsson 05-29-2018 08:28
Found In Egroup: MapInfo Pro \ view thread
Hi Laura, You say that the information is divided into layers. Typically you would style these in the Layer Control and then save a Worspace, then they will have the same rendering next time you open your workspace. This works fine also if the data has been edited, as long as the layers in the Geopackage ...

RE: What does your GIS stack and processing environment look like?

Posted By HÃ¥kan Karlsson 05-22-2018 10:15
Found In Egroup: All Things Location \ view thread
Thanks for sharing Kobi! Your setup seems similar to that of many clients here in the Nordic market, with a mix of TAB files (for the speed, and being available offline) and spatial databases + also non-spatial for adding related attribute data, such as property ownership. A couple of questions ...

RE: What language version of Spectrum Spatial Analyst do you use?

Posted By HÃ¥kan Karlsson 05-21-2018 07:21
Found In Egroup: Spectrum Spatial (SSA/LIM) \ view thread
Always the outlier Mati - in a very positive way! :-)

RE: Use more of my computer resources

Posted By HÃ¥kan Karlsson 05-15-2018 08:21
Found In Egroup: MapInfo Pro \ view thread
Go to the Backtage Area (the blue Pro tab to the left in the Ribbon UI). Under Options, in the System section, select Performance. This dialog lets you control two specific settings. The first is called Concurrency level, and this controls the number of cores that MapInfo may use. Make sure this ...

RE: Performance improvement

Posted By HÃ¥kan Karlsson 05-15-2018 08:02
Found In Egroup: MapInfo Pro \ view thread
In the Backtage Area under Options, the System section has a Performance dialog that lets you control two specific settings: Concurrency level - controls the number of cores that MapInfo may use. Selecting Full will provide highest performnance (but might slow down other applications while MapInfo ...

Free your GIS webinar - Sokigo guest speaker

Posted By HÃ¥kan Karlsson 04-25-2018 09:05
Found In Library: Mapinfo Nordic & Baltic Users Group

Free your GIS webinar - Sokigo guest speaker

Posted By HÃ¥kan Karlsson 04-25-2018 09:05
Found In Egroup: MapInfo Nordic & Baltic Users Group \ view thread
Tomorrow afternoon (26 April), @Anders Haraldsson? at Sokigo is one of the speakers in the webinar Free your GIS hosted by Directions Magazine. Great to see our region getting some international attention! As always with webinars, seats are still available. Register at: https://www.directionsmag ...

RE: Why is it sometimes beneficial to create a raster map instead of point map?

Posted By HÃ¥kan Karlsson 04-25-2018 08:05
Found In Library: Mapinfo Pro

RE: Why is it sometimes beneficial to create a raster map instead of point map?

Posted By HÃ¥kan Karlsson 04-25-2018 08:05
Found In Egroup: MapInfo Pro \ view thread
Great use case Chris! Also I really like how you elaborate on the display settings to convey the result of the analysis in best possible way. Another way to make a raster from a point file is the Distance method under Create Raster. Here is an example where service points (could well be pubs) are ...

Beta 2 for MapInfo Pro 17 has started

Posted By HÃ¥kan Karlsson 03-07-2018 07:44
Found In Egroup: MapInfo Nordic & Baltic Users Group \ view thread
Dont miss the chance to try out the new features in our coming v17 release! One of the additions to this version is the ability to edit distance units (kilometers, km, etc.) in the scale bar, this is one of the suggestions from users in our region that made it into the software. If you are not already ...