Automate

------------------------------
Benjamin Kielas | Data Lead
Generac Power Systems, Inc. | 2625106580
------------------------------

I had the same problem in VA01. With VA02 I had to put the text with add longtext to get it right.


------------------------------
PP Wortman | Master Data
Dekker Zevenhuizen B.V. | 0612608007
------------------------------

Hi Benjamin

Double clicking into the "word processor" like entry will require GUI scripting.

There is also an option in most tcodes to use a line editor - which would require breaking it into 72 characters.

But if you are on version 12.1, you can easily enter long text via functionality in the Winshuttle Function Module.  Here is the documentation:  https://docs.winshuttle.com/studio-en-12-1-x-online-help-studio-w-connect/12/Record-long-text.htm
You would record a simple FB02 script and the simply choose the long text you want to add to it.  It will add key fields and they take care of uploading/downloading the long text.  
If you have access to our online training (open a support ticket if you do not), there is a short session covering this functionality here:  https://winshuttle.ancileuperform.com/gm/folder-1.11.5843?mode=EU&originalContext=1.11.1834

Best Regards,
Sigrid

------------------------------
Sigrid Kok
PSE | Winshuttle NA
------------------------------

Thank you for this information. I was able to collectively create the script with all the feedback.

------------------------------
Benjamin Kielas | Data Lead
Generac Power Systems, Inc. | 2625106580
------------------------------

Original Message:
Sent: 07-21-2020 08:43
From: Sigrid Kok
Subject: FB02 TEXTS IN ACCOUNTING DOCUMENT ADD

Hi Benjamin

Double clicking into the "word processor" like entry will require GUI scripting.

There is also an option in most tcodes to use a line editor - which would require breaking it into 72 characters.

But if you are on version 12.1, you can easily enter long text via functionality in the Winshuttle Function Module.  Here is the documentation:  https://docs.winshuttle.com/studio-en-12-1-x-online-help-studio-w-connect/12/Record-long-text.htm
You would record a simple FB02 script and the simply choose the long text you want to add to it.  It will add key fields and they take care of uploading/downloading the long text.
If you have access to our online training (open a support ticket if you do not), there is a short session covering this functionality here:  https://winshuttle.ancileuperform.com/gm/folder-1.11.5843?mode=EU&originalContext=1.11.1834

Best Regards,
Sigrid

------------------------------
Sigrid Kok
PSE | Winshuttle NA
------------------------------

Hi Benjamin,

For trx FB02 is long text functionlity also available.
Make a recording for FB02. Open the recording in Winshuttle Studio.
Go to Map and choose Add Long Text from the menu.
A screen pops up where you can select the long texts you want to add in the script.
For using this the Winshuttle Function Module must be installed. (At least corresponding to your Studioversion of higher level. Preferable the highest available version.)

Sigrid was faster. :-)

------------------------------
Jan van Asseldonk | Consultant
CTAC | +31629078169
------------------------------

Thank you for this information. I was able to collectively create the script with all the feedback.

------------------------------
Benjamin Kielas | Data Lead
Generac Power Systems, Inc. | 2625106580
------------------------------

Original Message:
Sent: 07-21-2020 08:46
From: Jan van Asseldonk
Subject: FB02 TEXTS IN ACCOUNTING DOCUMENT ADD

Hi Benjamin,

For trx FB02 is long text functionlity also available.
Make a recording for FB02. Open the recording in Winshuttle Studio.
Go to Map and choose Add Long Text from the menu.
A screen pops up where you can select the long texts you want to add in the script.
For using this the Winshuttle Function Module must be installed. (At least corresponding to your Studioversion of higher level. Preferable the highest available version.)

Sigrid was faster. :-)

------------------------------
Jan van Asseldonk | Consultant
CTAC | +31629078169
------------------------------

Glad you got it sorted out, Benjamin!

------------------------------
Sigrid Kok
PSE | Winshuttle NA
------------------------------

Original Message:
Sent: 07-21-2020 12:15
From: Benjamin Kielas
Subject: FB02 TEXTS IN ACCOUNTING DOCUMENT ADD

Thank you for this information. I was able to collectively create the script with all the feedback.

------------------------------
Benjamin Kielas | Data Lead
Generac Power Systems, Inc. | 2625106580
------------------------------


Original Message:
Sent: 07-21-2020 08:46
From: Jan van Asseldonk
Subject: FB02 TEXTS IN ACCOUNTING DOCUMENT ADD

Hi Benjamin,

For trx FB02 is long text functionlity also available.
Make a recording for FB02. Open the recording in Winshuttle Studio.
Go to Map and choose Add Long Text from the menu.
A screen pops up where you can select the long texts you want to add in the script.
For using this the Winshuttle Function Module must be installed. (At least corresponding to your Studioversion of higher level. Preferable the highest available version.)

Sigrid was faster. :-)

------------------------------
Jan van Asseldonk | Consultant
CTAC | +31629078169

Thank you for this information. I was able to collectively create the script with all the feedback.

------------------------------
Benjamin Kielas | Data Lead
Generac Power Systems, Inc. | 2625106580
------------------------------