MapInfo Pro

Hi everyone. I have been running MapInfo in Parallels on an Intel MacBook for a couple years but I was recently evergreened with a M1 MacBook and have not been successful in getting MapInfo to launch. The application installed without issues and Windows 11 now is supposed to be able to emulate 64-bit apps but when I launch MapInfo it doesn't start. The icon doesn't appear in the application bar, the MapInfo banner doesn't show and in Task Manager it just pops up for a second and then disappears as if it is crashing on start. There are no error messages displayed and MapInfo support was unable to help since this is not a supported configuration. 

Has anyone had success in getting this running? Anywhere I could go to read crash logs to try to figure out the issue?

Thanks so much!!!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account
------------------------------

Hi. Works for me.

I installed a lot of any C++ runtime

------------------------------
Max Map
Knowledge Community Shared Account
Shelton
------------------------------

Original Message:
Sent: 02-13-2022 11:16
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi everyone. I have been running MapInfo in Parallels on an Intel MacBook for a couple years but I was recently evergreened with a M1 MacBook and have not been successful in getting MapInfo to launch. The application installed without issues and Windows 11 now is supposed to be able to emulate 64-bit apps but when I launch MapInfo it doesn't start. The icon doesn't appear in the application bar, the MapInfo banner doesn't show and in Task Manager it just pops up for a second and then disappears as if it is crashing on start. There are no error messages displayed and MapInfo support was unable to help since this is not a supported configuration.

Has anyone had success in getting this running? Anywhere I could go to read crash logs to try to figure out the issue?

Thanks so much!!!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account
------------------------------

Did you document by any chance what you installed to get it to work?

------------------------------
Jakub Stroinski
Knowledge Community Shared Account
------------------------------

Original Message:
Sent: 02-14-2022 09:40
From: Max Map
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi. Works for me.

I installed a lot of any C++ runtime

------------------------------
Max Map
Knowledge Community Shared Account
Shelton

Original Message:
Sent: 02-13-2022 11:16
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi everyone. I have been running MapInfo in Parallels on an Intel MacBook for a couple years but I was recently evergreened with a M1 MacBook and have not been successful in getting MapInfo to launch. The application installed without issues and Windows 11 now is supposed to be able to emulate 64-bit apps but when I launch MapInfo it doesn't start. The icon doesn't appear in the application bar, the MapInfo banner doesn't show and in Task Manager it just pops up for a second and then disappears as if it is crashing on start. There are no error messages displayed and MapInfo support was unable to help since this is not a supported configuration.

Has anyone had success in getting this running? Anywhere I could go to read crash logs to try to figure out the issue?

Thanks so much!!!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account
------------------------------

I install:
vc_redist.arm64.exe
vc_redist.x64.exe (2015)
But anyway, the printer driver was not installed (can be used from adobe)

(Macbook air M1, Parallels last version)

------------------------------
Max Map
Knowledge Community Shared Account
Shelton
------------------------------

Original Message:
Sent: 02-14-2022 10:30
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Did you document by any chance what you installed to get it to work?

------------------------------
Jakub Stroinski
Knowledge Community Shared Account

Original Message:
Sent: 02-14-2022 09:40
From: Max Map
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi. Works for me.

I installed a lot of any C++ runtime

------------------------------
Max Map
Knowledge Community Shared Account
Shelton

Original Message:
Sent: 02-13-2022 11:16
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi everyone. I have been running MapInfo in Parallels on an Intel MacBook for a couple years but I was recently evergreened with a M1 MacBook and have not been successful in getting MapInfo to launch. The application installed without issues and Windows 11 now is supposed to be able to emulate 64-bit apps but when I launch MapInfo it doesn't start. The icon doesn't appear in the application bar, the MapInfo banner doesn't show and in Task Manager it just pops up for a second and then disappears as if it is crashing on start. There are no error messages displayed and MapInfo support was unable to help since this is not a supported configuration.

Has anyone had success in getting this running? Anywhere I could go to read crash logs to try to figure out the issue?

Thanks so much!!!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account
------------------------------

Thanks for that! It started but then closed due to license issues


Reached out to Precisely support but I think we're making progress!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account
------------------------------

Original Message:
Sent: 02-14-2022 10:41
From: Max Map
Subject: MapInfo on M1 MacBook with ARM64 emulation

I install:
vc_redist.arm64.exe
vc_redist.x64.exe (2015)
But anyway, the printer driver was not installed (can be used from adobe)

(Macbook air M1, Parallels last version)

------------------------------
Max Map
Knowledge Community Shared Account
Shelton

Original Message:
Sent: 02-14-2022 10:30
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Did you document by any chance what you installed to get it to work?

------------------------------
Jakub Stroinski
Knowledge Community Shared Account

Original Message:
Sent: 02-14-2022 09:40
From: Max Map
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi. Works for me.

I installed a lot of any C++ runtime

------------------------------
Max Map
Knowledge Community Shared Account
Shelton

Original Message:
Sent: 02-13-2022 11:16
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi everyone. I have been running MapInfo in Parallels on an Intel MacBook for a couple years but I was recently evergreened with a M1 MacBook and have not been successful in getting MapInfo to launch. The application installed without issues and Windows 11 now is supposed to be able to emulate 64-bit apps but when I launch MapInfo it doesn't start. The icon doesn't appear in the application bar, the MapInfo banner doesn't show and in Task Manager it just pops up for a second and then disappears as if it is crashing on start. There are no error messages displayed and MapInfo support was unable to help since this is not a supported configuration.

Has anyone had success in getting this running? Anywhere I could go to read crash logs to try to figure out the issue?

Thanks so much!!!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account
------------------------------

The solution was to uninstall and reinstall MapInfo. Once I did that everything works with the C++ redistributables Max_Map suggested. Thanks so much for your help!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account
------------------------------

Original Message:
Sent: 02-14-2022 11:12
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Thanks for that! It started but then closed due to license issues


Reached out to Precisely support but I think we're making progress!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account

Original Message:
Sent: 02-14-2022 10:41
From: Max Map
Subject: MapInfo on M1 MacBook with ARM64 emulation

I install:
vc_redist.arm64.exe
vc_redist.x64.exe (2015)
But anyway, the printer driver was not installed (can be used from adobe)

(Macbook air M1, Parallels last version)

------------------------------
Max Map
Knowledge Community Shared Account
Shelton

Original Message:
Sent: 02-14-2022 10:30
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Did you document by any chance what you installed to get it to work?

------------------------------
Jakub Stroinski
Knowledge Community Shared Account

Original Message:
Sent: 02-14-2022 09:40
From: Max Map
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi. Works for me.

I installed a lot of any C++ runtime

------------------------------
Max Map
Knowledge Community Shared Account
Shelton

Original Message:
Sent: 02-13-2022 11:16
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi everyone. I have been running MapInfo in Parallels on an Intel MacBook for a couple years but I was recently evergreened with a M1 MacBook and have not been successful in getting MapInfo to launch. The application installed without issues and Windows 11 now is supposed to be able to emulate 64-bit apps but when I launch MapInfo it doesn't start. The icon doesn't appear in the application bar, the MapInfo banner doesn't show and in Task Manager it just pops up for a second and then disappears as if it is crashing on start. There are no error messages displayed and MapInfo support was unable to help since this is not a supported configuration.

Has anyone had success in getting this running? Anywhere I could go to read crash logs to try to figure out the issue?

Thanks so much!!!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account
------------------------------

Can I ask what version of Windows 11 you are running inside Paralells? I'm hoping to do this installation on my M1 Macbook soon and this thread has already been invaluable.

------------------------------
Collin Landis
EDGE REALTY PARTNERS
Phoenix AZ
------------------------------

Original Message:
Sent: 02-14-2022 12:26
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

The solution was to uninstall and reinstall MapInfo. Once I did that everything works with the C++ redistributables Max_Map suggested. Thanks so much for your help!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account

Original Message:
Sent: 02-14-2022 11:12
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Thanks for that! It started but then closed due to license issues


Reached out to Precisely support but I think we're making progress!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account

Original Message:
Sent: 02-14-2022 10:41
From: Max Map
Subject: MapInfo on M1 MacBook with ARM64 emulation

I install:
vc_redist.arm64.exe
vc_redist.x64.exe (2015)
But anyway, the printer driver was not installed (can be used from adobe)

(Macbook air M1, Parallels last version)

------------------------------
Max Map
Knowledge Community Shared Account
Shelton

Original Message:
Sent: 02-14-2022 10:30
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Did you document by any chance what you installed to get it to work?

------------------------------
Jakub Stroinski
Knowledge Community Shared Account

Original Message:
Sent: 02-14-2022 09:40
From: Max Map
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi. Works for me.

I installed a lot of any C++ runtime

------------------------------
Max Map
Knowledge Community Shared Account
Shelton

Original Message:
Sent: 02-13-2022 11:16
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi everyone. I have been running MapInfo in Parallels on an Intel MacBook for a couple years but I was recently evergreened with a M1 MacBook and have not been successful in getting MapInfo to launch. The application installed without issues and Windows 11 now is supposed to be able to emulate 64-bit apps but when I launch MapInfo it doesn't start. The icon doesn't appear in the application bar, the MapInfo banner doesn't show and in Task Manager it just pops up for a second and then disappears as if it is crashing on start. There are no error messages displayed and MapInfo support was unable to help since this is not a supported configuration.

Has anyone had success in getting this running? Anywhere I could go to read crash logs to try to figure out the issue?

Thanks so much!!!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account
------------------------------

Windows 11 Home
21H2
22000.526
Windows Feature Experience Pack 1000.22000.526.0

------------------------------
Max Map
Knowledge Community Shared Account
Shelton
------------------------------

Original Message:
Sent: 02-15-2022 12:50
From: Collin Landis
Subject: MapInfo on M1 MacBook with ARM64 emulation

Can I ask what version of Windows 11 you are running inside Paralells? I'm hoping to do this installation on my M1 Macbook soon and this thread has already been invaluable.

------------------------------
Collin Landis
EDGE REALTY PARTNERS
Phoenix AZ

Original Message:
Sent: 02-14-2022 12:26
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

The solution was to uninstall and reinstall MapInfo. Once I did that everything works with the C++ redistributables Max_Map suggested. Thanks so much for your help!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account

Original Message:
Sent: 02-14-2022 11:12
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Thanks for that! It started but then closed due to license issues


Reached out to Precisely support but I think we're making progress!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account

Original Message:
Sent: 02-14-2022 10:41
From: Max Map
Subject: MapInfo on M1 MacBook with ARM64 emulation

I install:
vc_redist.arm64.exe
vc_redist.x64.exe (2015)
But anyway, the printer driver was not installed (can be used from adobe)

(Macbook air M1, Parallels last version)

------------------------------
Max Map
Knowledge Community Shared Account
Shelton

Original Message:
Sent: 02-14-2022 10:30
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Did you document by any chance what you installed to get it to work?

------------------------------
Jakub Stroinski
Knowledge Community Shared Account

Original Message:
Sent: 02-14-2022 09:40
From: Max Map
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi. Works for me.

I installed a lot of any C++ runtime

------------------------------
Max Map
Knowledge Community Shared Account
Shelton

Original Message:
Sent: 02-13-2022 11:16
From: Jakub Stroinski
Subject: MapInfo on M1 MacBook with ARM64 emulation

Hi everyone. I have been running MapInfo in Parallels on an Intel MacBook for a couple years but I was recently evergreened with a M1 MacBook and have not been successful in getting MapInfo to launch. The application installed without issues and Windows 11 now is supposed to be able to emulate 64-bit apps but when I launch MapInfo it doesn't start. The icon doesn't appear in the application bar, the MapInfo banner doesn't show and in Task Manager it just pops up for a second and then disappears as if it is crashing on start. There are no error messages displayed and MapInfo support was unable to help since this is not a supported configuration.

Has anyone had success in getting this running? Anywhere I could go to read crash logs to try to figure out the issue?

Thanks so much!!!

------------------------------
Jakub Stroinski
Knowledge Community Shared Account
------------------------------