EngageOne™

 View Only
Back to discussions
Expand all | Collapse all

How do find my CPUID on Windows for EngageOne Enrichment for a first installation?

  • 1.  How do find my CPUID on Windows for EngageOne Enrichment for a first installation?

    Employee
    Posted 02-20-2020 03:27
    Does anybody know how to find the CPUID required to cut an EngageOne Enrichment (fka Streamweaver) on Windows?
    best regards

    ------------------------------
    Marcus
    ------------------------------


  • 2.  RE: How do find my CPUID on Windows for EngageOne Enrichment for a first installation?

    Posted 02-21-2020 08:23
    Hi Marcus,

    in the "old days" this used to be part or even the full mac-address of the first lan adapter in windows. As far as I remember there should be a commandline utility within streamweaver to detect/print that...
    For sure, Sonia Doncel or the guys at DialogGroep/DocumentDialog/CCMMasters would know that. @Adrie vlutters?

    Regards,
    Marc
    ​

    ------------------------------
    Marc Seidler
    BSG Business Services GmbH (VAR)
    Bielefeld
    ------------------------------

    Original Message


  • 3.  RE: How do find my CPUID on Windows for EngageOne Enrichment for a first installation?

    Employee
    Posted 02-21-2020 08:39
    There is an executable to run to display the CPU id Enrichment/StreamWeaver will use. I will email it directly to you.

    ------------------------------
    Eric Olson
    Senior Principal Software Engineer
    Pitney Bowes Software Inc.
    ------------------------------

    Original Message


  • 4.  RE: How do find my CPUID on Windows for EngageOne Enrichment for a first installation?

    Employee
    Posted 02-21-2020 11:41
    Thank you!

    I have now executed this utility and ipconfig /all as per Karens recommendation. Am right to say that for EngageOne Enrichment the CPUID on Windows is the same as the last 6 digits from the MAC address?

    Microsoft Windows [Version 10.0.14393]
(c) 2016 Microsoft Corporation. Alle Rechte vorbehalten.

C:\Users\ma004en>cd C:\temp\HostID\

C:\temp\HostID>HostID
Enrichment identified CPU: 3F4AD0

Enrichment identified IP address: 169.254.129.91

Press Enter to close

C:\temp\HostID>ipconfig /all

Windows-IP-Konfiguration

   Hostname  . . . . . . . . . . . . : CE-J0T6ZF2-10
   Primäres DNS-Suffix . . . . . . . : pbi.global.pvt
   Knotentyp . . . . . . . . . . . . : Hybrid
   IP-Routing aktiviert  . . . . . . : Nein
   WINS-Proxy aktiviert  . . . . . . : Nein

Ethernet-Adapter Ethernet:

   Verbindungsspezifisches DNS-Suffix: home
   Beschreibung. . . . . . . . . . . : Intel(R) Ethernet Connection I219-LM
   Physische Adresse . . . . . . . . : D4-81-D7-99-08-DC
   DHCP aktiviert. . . . . . . . . . : Ja
   Autokonfiguration aktiviert . . . : Ja
   IPv4-Adresse  . . . . . . . . . . : 192.168.0.171(Bevorzugt)
   Subnetzmaske  . . . . . . . . . . : 255.255.255.0
   Lease erhalten. . . . . . . . . . : Freitag, 21. Februar 2020 16:39:12
   Lease läuft ab. . . . . . . . . . : Freitag, 21. Februar 2020 18:09:12
   Standardgateway . . . . . . . . . : 192.168.0.1
   DHCP-Server . . . . . . . . . . . : 192.168.0.1
   DNS-Server  . . . . . . . . . . . : 192.168.0.1
   NetBIOS über TCP/IP . . . . . . . : Aktiviert

Drahtlos-LAN-Adapter WLAN:

   Medienstatus. . . . . . . . . . . : Medium getrennt
   Verbindungsspezifisches DNS-Suffix: home
   Beschreibung. . . . . . . . . . . : Intel(R) Dual Band Wireless-AC 8260
   Physische Adresse . . . . . . . . : 14-AB-C5-3F-4A-D0
   DHCP aktiviert. . . . . . . . . . : Ja
   Autokonfiguration aktiviert . . . : Ja


    ------------------------------
    Marcus Enger
    ------------------------------

    Original Message


  • 5.  RE: How do find my CPUID on Windows for EngageOne Enrichment for a first installation?

    Employee
    Posted 02-21-2020 11:47
    You should use 3F4AD0 from

    Enrichment identified CPU: 3F4AD0

    This will generally, but not always show up in ipconfig /all


    ------------------------------
    Eric Olson
    Senior Principal Software Engineer
    Pitney Bowes Software Inc.
    ------------------------------

    Original Message


  • 6.  RE: How do find my CPUID on Windows for EngageOne Enrichment for a first installation?

    Posted 02-21-2020 12:19
    Hi Marcus,

    If I was generating the key, this is the CPU id I would use for this:

    Ethernet-Adapter Ethernet:

    Verbindungsspezifisches DNS-Suffix: home
    Beschreibung. . . . . . . . . . . : Intel(R) Ethernet Connection I219-LM
    Physische Adresse . . . . . . . . : D4-81-D7-99-08-DC​

    Karen

    ------------------------------
    Karen Piggott
    CCM Support
    Pitney Bowes Software Ltd
    HENLEY-ON-THAMES
    ------------------------------

    Original Message


  • 7.  RE: How do find my CPUID on Windows for EngageOne Enrichment for a first installation?

    Posted 02-21-2020 08:39
    Hi Marcus,

    You can try using either getmac from a command prompt, or equally, ipconfig /all and from this and retrieve the one from the Ethernet Adapter vEthernet or similar.

    Karen

    ------------------------------
    Karen Piggott
    CCM Support
    Pitney Bowes Software Ltd
    HENLEY-ON-THAMES
    ------------------------------

    Original Message


  • 8.  RE: How do find my CPUID on Windows for EngageOne Enrichment for a first installation?

    Posted 02-21-2020 08:47
    Digging in ancient history resolves it:

    execute streamweaver.exe with out any parameters and it should write a streamw.msg file. Open in Editor and it will dislpay the CPU ID.

    Regards,
    Marc

    ------------------------------
    Marc Seidler
    BSG Business Services GmbH (VAR)
    Bielefeld
    ------------------------------

    Original Message


  • 9.  RE: How do find my CPUID on Windows for EngageOne Enrichment for a first installation?

    Posted 02-21-2020 09:49
    If all of the already given answers do not help, try https://downloadcenter.intel.com/download/28539/Intel-Processor-Identification-Utility-Windows-Version . In Intel tool to give all kind of information on your CPU.

    ------------------------------
    Adrie vlutters
    Consultant
    Document Dialog B.V.
    Bunnik
    ------------------------------

    Original Message


  • 10.  RE: How do find my CPUID on Windows for EngageOne Enrichment for a first installation?

    Posted 02-21-2020 15:10

    Hi, Marcus:

    Did you run the HostID.exe and use the returned CPU ID on your windows environment?  I saw Eric has sent you the HostID.exe and Karen has also explained how to find the CPU ID prior you receiving the HostID.exe.

    Let me know if you still have problem finding the CPU ID on Windows.

    Thanks,

    Shih-Ning



    ------------------------------
    Shih-Ning Shih
    Tech Support Rep
    Pitney Bowes Software Inc.
    Lanham MD
    ------------------------------

    Original Message


  • 11.  RE: How do find my CPUID on Windows for EngageOne Enrichment for a first installation?

    Employee
    Posted 02-23-2020 04:49
    Thank you all, I learned a lot.

    The challenge is indeed when you plan a new installation, hence there is no Streamweaver present. I believe the "getmac" command is the simplest way, thank you, Karen!

    Thank you all for your help!

    ------------------------------
    Marcus Enger
    ------------------------------

    Original Message