MapInfo Pro

Selecting the "Add Plan of Collars to Layout" option in the Drillholes > Add Section to Layout dialog produces a different scale ‘plan of Collars’ map.

Hi Lorenzo,

Try the following:

If the paper size was accidently removed from the frame setup then follow these steps to fix the issue.

1. Copy scaleout.cfg from C:\ProgramData\Encom\Discover\Config
2. Paste and overwrite existing file in C:\Users\USERNAME\AppData\Roaming\Encom\Discover\Config
3. Before loading up your drillhole Project, please go to Pro >Options > Printer > and pick your printer size you wish to Output to with your printer or MapInfo PDF size.
4. Also, Once you load your project, click on > Home > Page Setup > select printer information again.
5. Click on Discover > Scaled Output to create the scaled output again with drillhole project. It should now reflect correct printer and size. Let me know if this works for you.

Here is the updated article on how to correct the scaled output settings: https://li360.pitneybowes.com/s/article/ka180000000Gy3AAAS/MapInfo-Discover-How-to-restore-scaled-output-default-settings

first thanks to all for your valuable help and sorry for my English is not very good,

my problem lies in making a series of systematic sections when creating the floor of the section, disagree with the scale and consecutive sections also the scales are not the ones that configure in section output

Hi Lorenzo,

If you have your sections already created. I believe all you need to do is make sure you have scaled output for your drillhole project first.

Open Drillhole Project > select the following

1. Discover > Scaled Output > Scaled Output.
2. Scaled Output > Accept Map Position.
3. Drillholes > Section Output > Print Sections. Select one section to start.
4. Drillholes > Section Output > accept map position. This will allow you to select multiple sections and add to existing Collar Plan Map with sections below.
5. You should see your sections below your map now.