Community FAQs

  • 1.  Mimix_00 Library

    Posted 04-16-2021 11:20
    I have a customer with library Mimix_00 the text of the library is"SYSMGR RJ Target Library". The contents of the library has about 100 receivers in it. What is this library used for and what is the best practice of cleaning it up?

    ------------------------------
    Anthony Wade
    HA Administrator
    IBM Global Services Corporation
    ROCHESTER NY
    ------------------------------


  • 2.  RE: Mimix_00 Library

    Posted 04-19-2021 11:06
    Dear Anthony,

    the MIMIX_0x libraries contain indeed the remote journal receivers. They should be purged by the product MIMIX.
    If this is not the case, I suggest you check with MIMIX/WRKSYS using option "7=System manager status" and check if the managers are fine and their remote journal active and the unprocessed entries count is 0.

    If all is fine here, go to MIMIX/WRKJRNDFN PROCESS(*INTERNAL) and check on the appropriate system with option 17 if there are receivers in status *PARTIAL that might prevent the deletion. If this is the case, they need to be cleaned up manually.

    Regards, Katharina

    ------------------------------
    Katharina Karner
    Systems Engineer
    Pheron Technologies Group GmbH
    FRANKFURT AM MAIN
    ------------------------------



  • 3.  RE: Mimix_00 Library

    Posted 09-13-2021 06:46

    Hi,

    The best practices should be configurated in Mimix. Like :

    • Receiver delete management
    • Keep unsaved journal receivers
    • Keep journal receiver count
    • Keep journal receivers (days)
    • Audit notification information in the MIMIX_0 library
    etc...

    But the best way if you have Mimix 8 or 9 is to do the WRKSYS, at the line of the *MGT system, use option 18, it will produce the list of all journals on your system, use option 17  on the journals that you want to service, and for each one, do the F15, there you can delete the receivers with the confidence that Mimix will tell you that all the transaction are applied.

    If you are on Mimix 7, you must to mimix/mimix, option 11, work with journal definitions do the F15, there you can delete the receivers with the confidence that Mimix will tell you that all the transaction are applied.

    Note. That you should only delete the receivers after saving them and only if Mimix allows that. And remember the best practices on historical data, 7 days for receivers.

    Hope this helps.







    ------------------------------
    Miguel Barata
    mr
    CESCE SI
    OUTURELA
    ------------------------------